You are not logged in or registered. Please login or register to use the full functionality of this board...

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV settings, at a glance pocket guide
#1
Version.1.4 = "===== Account Settings =====";
You are not allowed to view links. Register or Login to view. = "Evolution v1.4";
You are not allowed to view links. Register or Login to view. = "Build 1.4.043";
You are not allowed to view links. Register or Login to view. = 1; // Enter a unique number to identify this EA

You are not allowed to view links. Register or Login to view. = false; // Setting this to true will close all open orders immediately

= "Account Trading Settings:";
You are not allowed to view links. Register or Login to view. = false; // Will disable EV from opening/closing trades

You are not allowed to view links. Register or Login to view. = false; // set to true for IBFX micro "penny a pip"

You are not allowed to view links. Register or Login to view. = 0; // Maximum open lots allowed by the broker

You are not allowed to view links. Register or Login to view. = 100; // Percentage of account you want to trade with EV: Only set if this is the master account.

You are not allowed to view links. Register or Login to view. = 100; // Percent of EV's Account percent to trade with this pair

You are not allowed to view links. Register or Login to view. = 10; // percent of portion balance lost before trading stops

You are not allowed to view links. Register or Login to view. = 50; // Percent of portion for max drawdown level.

You are not allowed to view links. Register or Login to view. = 40; // DD percent when APC kicks in
You are not allowed to view links. Register or Login to view. = false; // Setting this to true will stop the EA trading after any open trades have been closed

You are not allowed to view links. Register or Login to view. = 5; // Maximum spread allowed when opening trades

You are not allowed to view links. Register or Login to view. = false; // Transmits a SL in case of internet loss

You are not allowed to view links. Register or Login to view. = 999; // Power Out Stop Loss in pips
You are not allowed to view links. Register or Login to view. = true; // Will You are not allowed to view links. Register or Login to view. over holiday period

You are not allowed to view links. Register or Login to view. = "18/12-01/01"; // List of You are not allowed to view links. Register or Login to view., each seperated by a comma, [day]/[mth]-[day]/[mth], dates inclusive
HolidaysAllowTrades = true; // Allow an existing basket/hedge to continue trading during holiday

You are not allowed to view links. Register or Login to view. = true; // Confirm before actioning buttons
You are not allowed to view links. Register or Login to view. = false; // true = will save balance/equity statistics

You are not allowed to view links. Register or Login to view. = false;
You are not allowed to view links. Register or Login to view. = false; // will sound alarms
You are not allowed to view links. Register or Login to view. = "Alert.wav"; // Alarm sound to be played
You are not allowed to view links. Register or Login to view. = false; // True = will close trades in FIFO order

You are not allowed to view links. Register or Login to view. = false; // true = will delete all global variables

You are not allowed to view links. Register or Login to view. = false;

LabelDisplay = "Overlay Settings";
You are not allowed to view links. Register or Login to view. = true; // Turns the display on and off
You are not allowed to view links. Register or Login to view. = true; // Turns off Buy, Sell, ECA, Reset buttons

You are not allowed to view links. Register or Login to view. = true; // Display open trades table

You are not allowed to view links. Register or Login to view. = true; // Turns off copyright and icon
You are not allowed to view links. Register or Login to view. = true; // Turns off the CCI display
You are not allowed to view links. Register or Login to view. = true; // Display entry conditions
You are not allowed to view links. Register or Login to view. = true; // Show BE, TP and TS lines
dSmartGrid = true; // Display SmartGrid lines
You are not allowed to view links. Register or Login to view. = 100; // Moves display left and right
You are not allowed to view links. Register or Login to view. = 22; // Moves display up and down
You are not allowed to view links. Register or Login to view. = 10; // Moves CCI display left and right
You are not allowed to view links. Register or Login to view. = 410; // Moves ShowTrades display left and right
You are not allowed to view links. Register or Login to view. = 2; // Width of SmartGrid Lines
You are not allowed to view links. Register or Login to view. = "Arial Bold";// Display font
You are not allowed to view links. Register or Login to view. = 9; // Changes size of display characters
dButtonFontSize = 24; // Changes size of button characters

You are not allowed to view links. Register or Login to view. = 14; // Changes space between lines
You are not allowed to view links. Register or Login to view. = 1; // Ratio to increase label width You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view. = DeepSkyBlue; // default color of display characters

You are not allowed to view links. Register or Login to view. = Green; // default color of profit display characters

You are not allowed to view links. Register or Login to view. = Red; // default color of loss display characters

You are not allowed to view links. Register or Login to view. = White; // default color of ForeGround Text display characters

You are not allowed to view links. Register or Login to view. = DarkSlateGray;// default color of greyed out Entry items

"===== Lot Size and Grid Settings =====";
LabelLSI = "Lot Size Settings:";
You are not allowed to view links. Register or Login to view. = true; // Money Management
You are not allowed to view links. Register or Login to view. = 1; // Adjusts MM base lot
You are not allowed to view links. Register or Login to view. = 0.01; // Starting lots
You are not allowed to view links. Register or Login to view. = 1.4; // You are not allowed to view links. Register or Login to view. to increase lot size at each level

You are not allowed to view links. Register or Login to view. = false; // Next lot size will be auto calculated based on You are not allowed to view links. Register or Login to view.

AutoLotIgnoreWarning = false; // Do not perform You are not allowed to view links. Register or Login to view. check

AutoLotStart = 1; // Level at which You are not allowed to view links. Register or Login to view. will start
You are not allowed to view links. Register or Login to view. = 10; // Pip distance from price to set BE point by calculating AutoLots

You are not allowed to view links. Register or Login to view. = 100; // Maximum lot size You are not allowed to view links. Register or Login to view. for You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = 1; // You are not allowed to view links. Register or Login to view. not used for this number of levels

Level = 7; // Largest Assumed Basket size. Lower number = higher start lots

"Grid Level Settings:";
You are not allowed to view links. Register or Login to view. = false; // Auto calculation of TakeProfit and Grid size;

LabelATRTFr = "0:Chart, 1:M1, 2:M5, 3:M15, 4:M30, 5:H1, 6:H4, 7Big Grin1, 8:W1, 9:MN1";

You are not allowed to view links. Register or Login to view. = 0; // TimeFrame for ATR calculation
You are not allowed to view links. Register or Login to view. = 21; // Number of periods for the ATR calculation

You are not allowed to view links. Register or Login to view. = "4,4"; // Specifies number of levels in each block (separated by a comma)

You are not allowed to view links. Register or Login to view. = "25,50,100"; // Specifies number of pips for the levels in each block (separated by a comma)

You are not allowed to view links. Register or Login to view. = "50,100,200"; // Take profit for the levels in each block (separated by a comma)

You are not allowed to view links. Register or Login to view. = 1; // Widens/Squishes Grid
You are not allowed to view links. Register or Login to view. = 2400; // Time Grid in seconds, to avoid opening of lots of levels in fast market

"Flex Grid Settings:";
You are not allowed to view links. Register or Login to view. = true; // True = grid is not fixed, and will place pending trades around the current price

You are not allowed to view links. Register or Login to view. = 33; // Percent to 'offset' the grid from the current price: 50 = equidistant <50 = nearer price

You are not allowed to view links. Register or Login to view. = 14; // Period for FlexGrid size calculation
You are not allowed to view links. Register or Login to view. = 0; // In pips, used to offset first trade entry

"Smart Grid Settings:";
You are not allowed to view links. Register or Login to view. = true; // True = use RSI/MA calculation for next grid order

LabelRSITFr = "0:Chart, 1:M1, 2:M5, 3:M15, 4:M30, 5:H1, 6:H4, 7Big Grin1, 8:W1, 9:MN1";

You are not allowed to view links. Register or Login to view. = 3; // Timeframe for RSI calculation
You are not allowed to view links. Register or Login to view. = 14; // Period for RSI calculation
You are not allowed to view links. Register or Login to view. = 0; // 0=C, 1=O, 2=H, 3=L, 4=HL/2, 5=HLC/3 6=HLCC/4

You are not allowed to view links. Register or Login to view. = 10; // Period for MA of RSI calculation
You are not allowed to view links. Register or Login to view. = 0; // 0=SMA, 1=EMA, 2=SMMA, 3=LWMA

LabelHAMA = "HAMA Settings:";
You are not allowed to view links. Register or Login to view. = true; // true = use Heiken-Ashi Moving average for next grid order

"0:Chart, 1:M1, 2:M5, 3:M15, 4:M30, 5:H1, 6:H4, 7Big Grin1, 8:W1, 9:MN1";

HAMATF = 0;
You are not allowed to view links. Register or Login to view. = 20; // Period for HAMA calculation
You are not allowed to view links. Register or Login to view. = 1; // 0=SMA, 1=EMA, 2=SMMA, 3=LWMA

You are not allowed to view links. Register or Login to view. = 3; // Minimum pips for HAMA bar before trade allowed



"Indicator / Entry Settings:";
You are not allowed to view links. Register or Login to view. = "P"; // M = Market Orders, P = Pending
You are not allowed to view links. Register or Login to view. = 0; // Delay in seconds between closing one basket and opening another

You are not allowed to view links. Register or Login to view. = 3; // Trend: 0=up 1=down 2=range 3=off

You are not allowed to view links. Register or Login to view. = false; // true = ANY entry can be used to open orders, false = ALL entries used to open orders

"MA Entry Settings:";
You are not allowed to view links. Register or Login to view. = 1; // 0 = Off, 1 = will base entry on MA You are not allowed to view links. Register or Login to view., 2 = will trade in reverse

You are not allowed to view links. Register or Login to view. = 100; // Period of MA (H4 = 100, H1 = 400)
You are not allowed to view links. Register or Login to view. = 10; // Distance from MA to be treated as Ranging Market

"CCI Entry Settings:";
You are not allowed to view links. Register or Login to view. = 0; // 0 = Off, 1 = will base entry on CCI indicator, 2 = will trade in reverse

You are not allowed to view links. Register or Login to view. = 14; // Period for CCI calculation

"Bollinger Bands Entry Settings:";
You are not allowed to view links. Register or Login to view. = 0; // 0 = Off, 1 = will base entry on BBands, 2 = will trade in reverse

You are not allowed to view links. Register or Login to view. = 10; // Period for Bollinger
You are not allowed to view links. Register or Login to view. = 10; // Up/Down spread
You are not allowed to view links. Register or Login to view. = 2.0; // Standard deviation You are not allowed to view links. Register or Login to view. for You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = false; // Base BB entry on candles rather than breaking the bands.

You are not allowed to view links. Register or Login to view. = 2; // Number of 'external' candles before allowing trade to open.

"Stochastic Entry Settings:";
You are not allowed to view links. Register or Login to view. = 0; // 0 = Off, 1 = will base entry on Stochastic, 2 = will trade in reverse

You are not allowed to view links. Register or Login to view. = 20; // Determines Overbought and Oversold Zones

You are not allowed to view links. Register or Login to view. = 10; // Stochastic You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view. = 2; // Stochastic You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view. = 2; // Stochastic You are not allowed to view links. Register or Login to view.

"Previous Candle Entry Settings:";
You are not allowed to view links. Register or Login to view. = 0; // 0 = Off, 1 = will base entry on previous candle, 2 = will trade in reverse

LabelPCTFr = "0:Chart, 1:M1, 2:M5, 3:M15, 4:M30, 5:H1, 6:H4, 7Big Grin1, 8:W1, 9:MN1";

You are not allowed to view links. Register or Login to view. = 7; // Timeframe for previous candle
You are not allowed to view links. Register or Login to view. = 0; // 0=Close; 1=Open; 2=High; 3=Low; 4=Median; 5=Typical; 6=Weighted; 7=Bullish/Bearish;

You are not allowed to view links. Register or Login to view. = 10; // Distance from You are not allowed to view links. Register or Login to view. 0 - 6 before placing a trade

"Upper Time Frame Settings:";
You are not allowed to view links. Register or Login to view. = true; // Use higher TF to detect general trend

LabelUTFTFr = "0:Chart, 1:M1, 2:M5, 3:M15, 4:M30, 5:H1, 6:H4, 7Big Grin1, 8:W1, 9:MN1";

You are not allowed to view links. Register or Login to view. = 8; // Timeframe of higher TF
You are not allowed to view links. Register or Login to view. = 14; // Period for higher TF
You are not allowed to view links. Register or Login to view. = 0; // 0=C, 1=O, 2=H, 3=L, 4=HL/2, 5=HLC/3 6=HLCC/4

You are not allowed to view links. Register or Login to view. = 10; // Period for MA of RSI calculation
You are not allowed to view links. Register or Login to view. = 0; // 0=SMA, 1=EMA, 2=SMMA, 3=LWMA

You are not allowed to view links. Register or Login to view. = 0.5; // Spread of RSI-RSIMA to define a ranging market

You are not allowed to view links. Register or Login to view. = false; // Always use UTF for all basket trades entry

LabelDL3 = "===== Trading and Exit Settings =====";
LabelTSI = "Trading Settings:";
You are not allowed to view links. Register or Login to view. = 15; // Maximum number of trades to place (stops placing orders when reaches You are not allowed to view links. Register or Login to view.)

You are not allowed to view links. Register or Login to view. = 12; // Close All level, when reaches this level, doesn't wait for TP to be hit

You are not allowed to view links. Register or Login to view. = 8; // Level to start You are not allowed to view links. Register or Login to view. at
You are not allowed to view links. Register or Login to view. = 2; // Pips added to Break Even Point before BE closure

You are not allowed to view links. Register or Login to view. = 0; // Force Take Profit to BE +/- xx Pips
You are not allowed to view links. Register or Login to view. = 0; // Ensure Take Profit is at least BE +/- xx Pips

You are not allowed to view links. Register or Login to view. = true; // True = will allow trades opposite to basket

You are not allowed to view links. Register or Login to view. = false; // True = will close the oldest open trade after You are not allowed to view links. Register or Login to view. is reached

You are not allowed to view links. Register or Login to view. = 5; // will start closing oldest open trade at this level

You are not allowed to view links. Register or Login to view. = 3; // Number of trades to close on first try

You are not allowed to view links. Register or Login to view. = 4; // Maximum number of oldest trades to close

You are not allowed to view links. Register or Login to view. = 10; // After Oldest Trades have closed, Forces Take Profit to BE +/- xx Pips

You are not allowed to view links. Register or Login to view. = false; // Will open reverse trades after level You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = 1; // Will increase/decrease the standard Contra lot size.

You are not allowed to view links. Register or Login to view. = 2; // Level at which Contra Trades starts.
cCloseWithGS = true; // Close Contra Trade if corresponding GridScalp trade closes.

You are not allowed to view links. Register or Login to view. = 2; // 0=Account, 1,2=Basket/Gravy, 3,4=Profit Only, 5,6=Basket/Gravy only after DD/L, 7,8=Profit Only

"Exit Settings:";
You are not allowed to view links. Register or Login to view. = 0; // Pips for fixed StopLoss from BE, 0=off
You are not allowed to view links. Register or Login to view. = 0; // Pips for trailing stop loss from BE + You are not allowed to view links. Register or Login to view.: +ve = fixed trail; -ve = reducing trail; 0=off

LabelTSLAt = "TSL Start at: 0=BE, 1=BE+, 2=TP, 3=TP+";
TSLStartAt = 2; // Default TSLStartAt = TP
You are not allowed to view links. Register or Login to view. = 3; // Minimum trailing stop pips if using reducing TS

You are not allowed to view links. Register or Login to view. = 0; // Maximum number of baskets opened per day

You are not allowed to view links. Register or Login to view. = 0; // Daily Profit Target
You are not allowed to view links. Register or Login to view. = false; // Trades/target based on session rather than 24 hour day

You are not allowed to view links. Register or Login to view. = "3,5"; // Number of baskets opened per session

You are not allowed to view links. Register or Login to view. = "10,20"; // Profit targets per session
You are not allowed to view links. Register or Login to view. = false; // Turns on TP move and Profit Trailing Stop Feature

You are not allowed to view links. Register or Login to view. = 90; // Locks in Profit at this percent of Total Profit Potential

You are not allowed to view links. Register or Login to view. = 30; // Moves TP this amount in pips
You are not allowed to view links. Register or Login to view. = 2; // Number of times you want TP to move before stopping movement

"Early Exit Settings:";
You are not allowed to view links. Register or Login to view. = false; // Reduces PbTarget by a percentage over time and number of levels open

You are not allowed to view links. Register or Login to view. = 3; // Number of Hours to wait before EE over time starts

You are not allowed to view links. Register or Login to view. = true; // true = StartHours from FIRST trade: false = StartHours from LAST trade

You are not allowed to view links. Register or Login to view. = 0.5; // Percentage reduction per hour (0 = OFF)

You are not allowed to view links. Register or Login to view. = 5; // Number of Open Trades before EE over levels starts

You are not allowed to view links. Register or Login to view. = 10; // Percentage reduction at each level (0 = OFF)

You are not allowed to view links. Register or Login to view. = false; // true = Will allow the basket to close at a loss: false = Minimum profit is Break Even

"===== Hedge and Scalp Settings =====";
LabelHSI = "Hedge Settings:";
You are not allowed to view links. Register or Login to view. = false; // Turns DD hedge on/off
You are not allowed to view links. Register or Login to view. = ""; // Enter the Symbol of the same/correlated pair EXACTLY as used by your broker.

You are not allowed to view links. Register or Login to view. = 30; // Number of days for checking Hedge Correlation

You are not allowed to view links. Register or Login to view. = "D"; // D = start hedge at set DD; L = Start at set level; T = Start with change of Trend

You are not allowed to view links. Register or Login to view. = 20; // DD Percent or Level at which Hedge starts

You are not allowed to view links. Register or Login to view. = 0.8; // First Hedge trade Lots = Open Lots * You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = 1.3; // Next Hedge Lots = Open Lots * You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = 50; // DD Hedge maximum pip loss - also hedge trailing stop

You are not allowed to view links. Register or Login to view. = 0; // Hedge Take Profit
You are not allowed to view links. Register or Login to view. = 5; // Increase to You are not allowed to view links. Register or Login to view. to stop early re-entry of the hedge

You are not allowed to view links. Register or Login to view. = false; // True = Trailing Stop will stop at BE; False = Hedge will continue into profit

You are not allowed to view links. Register or Login to view. = true; // False = Trailing Stop is Fixed; True = Trailing Stop will reduce after BE is reached

"General Scalp Settings:";
You are not allowed to view links. Register or Login to view. = 10; // Close basket if DD hits this value, and Profit Target is reached

You are not allowed to view links. Register or Login to view. = 8; // Close basket if Level hits this value, and Profit Target is reached

"Grid Scalp Settings:";
You are not allowed to view links. Register or Login to view. = false; // Turns Grid Scalp on/off
You are not allowed to view links. Register or Login to view. = 0; // The number of pips profit to be taken by scalp; 0=off

You are not allowed to view links. Register or Login to view. = 3; // Level to start scalping
You are not allowed to view links. Register or Login to view. = true; // Will only scalp the last grid level.
You are not allowed to view links. Register or Login to view. = 2; // 0=Account, 1,2=Basket/Gravy, 3,4=Profit Only, 5,6=Basket/Gravy only after DD/L, 7,8=Profit Only

"SmartScalp Settings";
You are not allowed to view links. Register or Login to view. = false; // Turns Smart Scalp On/Off
You are not allowed to view links. Register or Login to view. = true; // Use Money Management for SmartScalp

You are not allowed to view links. Register or Login to view. = 1; // SmartScalp Lot Adjustment Factor
You are not allowed to view links. Register or Login to view. = 0.1; // Smart Scalp lot size if sMM is off
You are not allowed to view links. Register or Login to view. = 0.5; // Smart Scalp Lot size = Minumum of (Basket Lots * You are not allowed to view links. Register or Login to view.), You are not allowed to view links. Register or Login to view.; 0 = Use You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = 0; // Maximum SS trades per basket
You are not allowed to view links. Register or Login to view. = 2; // 0=Account, 1,2=Basket/Gravy, 3,4=Profit Only, 5,6=Basket/Gravy only after DD/L, 7,8=Profit Only

You are not allowed to view links. Register or Login to view. = 100; // SmartScalp profit target - 0=off
You are not allowed to view links. Register or Login to view. = 30; // SmartScalp Take Profit - 0=off
You are not allowed to view links. Register or Login to view. = false; // Use High/Low of previous candles as stop

You are not allowed to view links. Register or Login to view. = 3; // No of candles for calculating high/low

You are not allowed to view links. Register or Login to view. = 10; // Buffer from Candle High/Low before allowing new trades to open

You are not allowed to view links. Register or Login to view. = 0; // SmartScalp Stop Loss 0=off
You are not allowed to view links. Register or Login to view. = 0; // SmartScalp Trailing Stop Loss - 0=off
You are not allowed to view links. Register or Login to view. = false; // True = Trailing Stop will stop at BE; False = Smart Scalp will continue into profit

You are not allowed to view links. Register or Login to view. = true; // False = Stop Loss is Fixed; True = Stop Loss will reduce after BE is reached

You are not allowed to view links. Register or Login to view. = 2; // Stop Loss You are not allowed to view links. Register or Login to view. to spread reduction over

You are not allowed to view links. Register or Login to view. = false; // true = only open if basket is open; false = open at any time

You are not allowed to view links. Register or Login to view. = false; // true = close when basket closes; false = close when sniper reverses/TP/SL

You are not allowed to view links. Register or Login to view. = true; // Re open SmartScalp after close
You are not allowed to view links. Register or Login to view. = true; // Use WoodiesCCI for entry/exit
You are not allowed to view links. Register or Login to view. = 14; // Slow Period for WoodiesCCI
You are not allowed to view links. Register or Login to view. = 6; // Fast Period for WoodiesCCI
You are not allowed to view links. Register or Login to view. = 100; // Minimum CCI value before placing a trade

You are not allowed to view links. Register or Login to view. = 5; // CCI dist from 0 to ignore
You are not allowed to view links. Register or Login to view. = true; // Use Sniper Settings for entry/exit
You are not allowed to view links. Register or Login to view. = 5; // Trigger-Ergo to trigger trade
You are not allowed to view links. Register or Login to view. = true; // true = close when sniper reverses; false = close when basket closes/TP/SL

You are not allowed to view links. Register or Login to view. = 10; // Sniper input pq
You are not allowed to view links. Register or Login to view. = 10; // Sniper input pr
You are not allowed to view links. Register or Login to view. = 5; // Sniper input ps
You are not allowed to view links. Register or Login to view. = 3; // Sniper input trigger
You are not allowed to view links. Register or Login to view. = true; // Use Heiken Ashi Moving Average to confirm entry

You are not allowed to view links. Register or Login to view. = 20; // Period for HAMA
You are not allowed to view links. Register or Login to view. = 1; // 0=SMA, 1=EMA, 2=SMMA, 3=LWMA

You are not allowed to view links. Register or Login to view. = 5; // Minimum HAMA candle size
You are not allowed to view links. Register or Login to view. = true; // Close scalp trade if HAMA reverses

= "Wave Settings";
You are not allowed to view links. Register or Login to view. = false; // Turns Wave Scalp On/Off
You are not allowed to view links. Register or Login to view. = true; // Use Money Management for WaveScalp

You are not allowed to view links. Register or Login to view. = 1; // WaveScalp Lot Adjustment Factor
You are not allowed to view links. Register or Login to view. = 0.1; // Wave lot size if wMM is off
You are not allowed to view links. Register or Login to view. = 0.5; // Wave Scalp Lot size = Minumum of (Basket Lots * You are not allowed to view links. Register or Login to view.), You are not allowed to view links. Register or Login to view.; 0 = Use You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view. = 5; // RSIOMA-MARSIOMA to trigger trade
You are not allowed to view links. Register or Login to view. = 2; // 0=Account, 1,2=Basket/Gravy, 3,4=Profit Only, 5,6=Basket/Gravy only after DD/L, 7,8=Profit Only

You are not allowed to view links. Register or Login to view. = 100; // Wave profit target
You are not allowed to view links. Register or Login to view. = 30; // Wave Take Profit - 0=off
You are not allowed to view links. Register or Login to view. = false; // Use High/Low of previous candles as stop

You are not allowed to view links. Register or Login to view. = 3; // No of candles for calculating high/low

You are not allowed to view links. Register or Login to view. = 0; // Wave Stop Loss 0=off
You are not allowed to view links. Register or Login to view. = 0; // Wave Trailing Stop Loss - 0=off
You are not allowed to view links. Register or Login to view. = false; // True = Trailing Stop will stop at BE; False = Wave will continue into profit

You are not allowed to view links. Register or Login to view. = true; // False = Stop Loss is Fixed; True = Stop Loss will reduce after BE is reached

You are not allowed to view links. Register or Login to view. = 2; // Stop Loss You are not allowed to view links. Register or Login to view. to spread reduction over

You are not allowed to view links. Register or Login to view. = true; // Re open WaveScalp after close

You are not allowed to view links. Register or Login to view. = false; // Wait for RSIOMA cross before placing trade

You are not allowed to view links. Register or Login to view. = 3; // =3/4
You are not allowed to view links. Register or Login to view. = 36; // =4/12/20
You are not allowed to view links. Register or Login to view. = 12; // =12/20/54
You are not allowed to view links. Register or Login to view. = 12;
You are not allowed to view links. Register or Login to view. = 3; // =1..5
You are not allowed to view links. Register or Login to view. = 5;
You are not allowed to view links. Register or Login to view. = 1; // 0=SMA, 1=EMA, 2=SMMA, 3=LWMA

You are not allowed to view links. Register or Login to view. = 0; // 0=C, 1=O, 2=H, 3=L, 4=HL/2, 5=HLC/3 6=HLCC/4

You are not allowed to view links. Register or Login to view. = 21;
You are not allowed to view links. Register or Login to view. = 1; // 0=SMA, 1=EMA, 2=SMMA, 3=LWMA

= "===== Trading Hours and Other Settings =====";

You are not allowed to view links. Register or Login to view. = true; // Auto calculation of broker GMT offset

You are not allowed to view links. Register or Login to view. = 0; // Only used if AutoGMT is false
DisplayBrokerTimes = false;
LabelGMT = "Enter ALL hours as GMT if using You are not allowed to view links. Register or Login to view.";

= "Basket Trading Hours:";
You are not allowed to view links. Register or Login to view. = "21-24"; // Brokers' Hours to trade on Sunday

You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-23";
You are not allowed to view links. Register or Login to view. = "0-12,15-23";

= "SmartScalp Trading Hours:";
You are not allowed to view links. Register or Login to view. = "21-24"; // Brokers' Hours to trade on Sunday

You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-23";
You are not allowed to view links. Register or Login to view. = "0-12,15-23";

= "WaveScalp Trading Hours:";
You are not allowed to view links. Register or Login to view. = "21-24"; // Brokers' Hours to trade on Sunday

You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-24";
You are not allowed to view links. Register or Login to view. = "0-23";
You are not allowed to view links. Register or Login to view. = "0-12,15-23";

= "Other Settings:";
You are not allowed to view links. Register or Login to view. = true; // true = Recoup any Hedge/CloseOldest losses: false = Use original profit target.
You are not allowed to view links. Register or Login to view. = 3; // Adjusts opening and closing orders by "slipping" this amount

You are not allowed to view links. Register or Login to view. = 3600; // seconds betwen stats entries
You are not allowed to view links. Register or Login to view. = false; // true for backtest - false for foward/live to ACCUMULATE equity traces

You are not allowed to view links. Register or Login to view. = ""; // Symbol You are not allowed to view links. Register or Login to view.
You are not allowed to view links. Register or Login to view. = ""; // Symbol You are not allowed to view links. Register or Login to view.

LabelUE = "Email Settings:";
You are not allowed to view links. Register or Login to view. = false;
You are not allowed to view links. Register or Login to view. = 20;
You are not allowed to view links. Register or Login to view. = 30;
You are not allowed to view links. Register or Login to view. = 40;
You are not allowed to view links. Register or Login to view. = 24; // Minimum number of hours between emails

LabelOpt = "These values can only be used while optimizing";

UseGridOpt = false; // Set to true if you want to be able to optimize the grid settings.

SetArray1 = 4; // These values will replace the normal You are not allowed to view links. Register or Login to view.,

SetArray2 = 4; // You are not allowed to view links. Register or Login to view. and You are not allowed to view links. Register or Login to view. during optimization.

SetArray3 = 0; // The default values are intthe same as the normal array defaults

SetArray4 = 0;
GridArray1 = 25; // REMEMBER:
GridArray2 = 50; // There must be one more value for GridArray and TPArray

GridArray3 = 100; // than there is for SetArray
GridArray4 = 0;
GridArray5 = 0;
TPArray1 = 50;
TPArray2 = 100;
TPArray3 = 200;
TPArray4 = 0;
TPArray5 = 0;
Ratz

JTA video's on YouTube  You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view.    v1.3



Reply
Thanks given by: dörpn , Anova , MAAbrahao
#2
Wink Thank you for this. I should have looked before I got wet!
Cool  Te Ngeru Pango

carpe diem




Reply
Thanks given by:
#3
(11-19-2014, 12:17 PM)BigTE Wrote: You are not allowed to view links. Register or Login to view.Wink Thank you for this. I should have looked before I got wet!

All information on EV and the other EAs is available on JTAWiki

You are not allowed to view links. Register or Login to view.
Reply
Thanks given by:
#4
Im as confused as a cow on astro turf here.

i downloaded the evolution EA but where do we get the set files from ?
Reply
Thanks given by:
#5
(11-13-2018, 01:02 PM)jdmark86 Wrote: You are not allowed to view links. Register or Login to view.Im as confused as a cow on astro turf here.

i downloaded the evolution EA but where do we get the set files from ?


There is a default set file hard coded in it.
Ratz

JTA video's on YouTube  You are not allowed to view links. Register or Login to view.

You are not allowed to view links. Register or Login to view.    v1.3



Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  MACD Settings carlosar 3 1,826 04-25-2014, 08:57 AM
Last Post: d4v3
  A better USDCAD 2 way settings mrexe 19 7,671 09-15-2012, 03:15 AM
Last Post: y0om4a



Users browsing this thread: 1 Guest(s)
Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Online Users
There are currently 23 online users.
» 0 Member(s) | 23 Guest(s)

Search Forums

(Advanced Search)

Forum Statistics
» Members: 9,067
» Latest member: YnsAxu
» Forum threads: 2,811
» Forum posts: 25,606

Full Statistics